木托盤制作工藝流程以及包裝箱的運輸過程中產生的一些問題
四步法介紹木托盤制作工藝流程
木托盤制作四步法,通過專業(yè)化流水線作業(yè),將木托盤的制作程式化,從而更加科學和節(jié)省人力,財力和物力,并且保證質量和交貨周期。
下面簡單介紹一下這四步法的具體步驟。
一、木托盤制作之選材
二、木托盤制作之烘干
選擇木托盤原材料之后,木頭一定要經過干燥處理,進行有效的脫水,消除它的內應力,使得木材在加工制造過程中不會因為潮濕而產生病蟲,不會因為干燥出現裂變,影響木托盤的質量,影響出口。
三、木托盤制作之切割、拋光
木頭經過干燥處理之后,主要就是木材的加工了,使用裁板鋸進行切割,用平刨機進行刨光、斷頭,確保木材的光滑性,在選用完合適的木材以后要進行打蠟、精加工,確保它的使用質量達到最佳。
四、木托盤制作之精加工
木材進過刨光之后,就是木材的深加工處理,需要使用砂光機等工藝加工處理,加工為成型彩板塊。采用具有防脫功能的射釘將成型材板釘成半成品托盤,或者可用以下防脫墊等。
包裝箱的運輸在整個物流中占有重要地位。為了保證木包裝箱運輸的安全,需要注意以下問題:
1.設備形體規(guī)則的設備可直接裝車,木包裝箱加以必要捆綁即可運輸。
2.較高的設備必須采用手拉葫蘆或專用緊繩器把木包裝箱與車廂兩側加以固定后運輸。
3.較精密的設備必須設置防滑木及減震墊。
4.較長的設備必須保證同時有多個受力點與車廂平衡接觸(必要時加設承重平衡木包裝箱底座)。
5.司機運輸木包裝箱要高度謹慎,用豐富設備運輸經驗的司機,駕駛過程中做到勻速行使。
6.運輸線路要提前考察,路況特別不好的要提前休整或更改運輸路線。
The transportation of packing boxes plays an important role in the whole logistics. In order to ensure the safety of the transportation of wooden packing boxes, the following problems should be paid attention to:
1. Equipment with regular shape can be loaded directly, and wooden packing boxes can be transported with necessary bundles.
2. Higher equipment must be transported by fixing the wooden packing box and both sides of the carriage with hand hoists or special rope fasteners.
3. More sophisticated equipment must be equipped with anti-skid wood and shock absorber pads.
4. The longer equipment must ensure that there are multiple stress points at the same time in balanced contact with the carriage (if necessary, the base of the load-bearing balance beam packing box should be added).
5. Drivers should be highly cautious in transporting wooden packing boxes. Drivers who have rich experience in transportation with equipment should exercise at a uniform speed during driving.
6. Transport routes should be inspected in advance, and roads in particularly bad condition should be restored or changed in advance.